Meets ASTM F963-08 Standard Consumer Safety Specifications on Toy Safety
All RCP Tracks sold in the US are drop shipped from our warehouse. If a specific track is in stock at our warehouse, than all US distributors, dealers and stores have it in stock. Check our "Stock Status" page for day to day stock status.
We manfuacture two different sizes of track. Our 50cm tracks incorporate square tiles measuring 20" x 20". With a standard two tile width track, the lane width from inside to inside rail is 33". Our 30cm tracks incorporate square tiles measuring 12" x 12". With a standard two tile width track, the lane width from inside to inside rail is 19". By adding blank tiles from either our expansion kits or blank tile kits, you can increase the lane width in increments of 20" (50cm tracks) and 12" (30cm tracks).
Please not that 50cm tracks purchased from Kyosho Japan and their distributors overseas, have an opposite link pattern to all other 50cm tracks. You can still connect the tracks together, but the opposite top surface will be facing up. There may be other differences from country to country. Please contact us with any questions you may have when purchasing tracks from multiple countries.
Please note, due to the manufacturing process that creates the rough surface and temperature changes from the factory, there can be up to a 1/16th of an inch or greater difference in tile thickness. 1/24th scale cars and larger don't usually have an issue with the tile thickness difference, but when smaller RC cars are used, users may need to put a piece of tape under the thinner tile at the joint to help even out the surfaces.
If you have any questions regarding our track products, please contact us at rcptracksinfo@kittrich.com
RCP Tracks Wide L Part #17440 $210
If this is your first track or adding to an existing track, the Wide L kit by RCP Tracks is your best choice. This huge track measures 12’ 4” X 9’ 8” X 6’ 5” and can be used by itself or combined with other tracks to create larger and more challenging road courses. Everything is included in the Wide L kit to create the layout shown below. No additional pieces are needed. Kit includes 1 1/8” tall soft side rails and strong threaded attachment pins that secure the rails to the track. No need to worry about the rails coming off from car impacts. You can remove the rails after use or store them with the rails connected for faster set up time. Track comes with two racing surfaces, smooth for loose racing or textured for high level grip when using soft rubber tire compounds. Features: ~20” X 20” tile size. ~US patented design ~Custom interlocking tiles for quick set up, tear down and storage. ~Modular design that allows you to combine tracks and create many differentlayouts. NOTE: This track can only be combined with other 20” size RCP track tile kits or accessories. ~Soft side rails that help protect the fragile plastic RC car bodies. ~Quick set up with no tools or glue. ~RCP Tracks are used by some of the top RC manufacturers exclusively for micro pro racing events around the world. ~Flexible racing surface allows for the creation of bank turns, just like pro stock car tracks.
RCP Tracks Wide Oval Part # 10428 $159 If this is your first track or adding to an existing track, the Wide L kit by RCP Tracks is your best choice. This huge track measures 12’ 4” X 9’ 8” X 6’ 5” and can be used by itself or combined with other tracks to create larger and more challenging road courses. Everything is included in the Wide L kit to create the layout shown below. No additional pieces are needed. Kit includes 1 1/8” tall soft side rails and strong threaded attachment pins that secure the rails to the track. No need to worry about the rails coming off from car impacts. You can remove the rails after use or store them with the rails connected for faster set up time.Track comes with two racing surfaces, smooth for loose racing or textured for high level grip when using soft rubber tire compounds. Features: ~20” X 20” tile size. ~US patented design ~Custom interlocking tiles for quick set up, tear down and storage. ~Modular design that allows you to combine tracks and create many differentlayouts. NOTE: This track can only be combined with other 20” size RCP track tile kits or accessories. ~Soft side rails that help protect the fragile plastic RC car bodies. ~Quick set up with no tools or glue. ~RCP Tracks are used by some of the top RC manufacturers exclusively for micro pro racing events around the world.
RCP Tracks Expansion Kit Part # 52436
$239 The expansion kit by RCP is a great addition to the Wide L, Wide Oval or any combination of these tracks. Each expansion kit includes 24 straight tiles/rails + 36 blank tiles. The blank tiles allow you to widen the lane widths of your track in 20” increments. When adding blank tiles, your overall track layout will grow in length, so RCP Tracks includes 24 straight tiles and rails to make up the difference. The expansion kit includes 1 1/8” tall soft side rails and strong threaded attachment pins that secure the rails to the track. No need to worry about the rails coming off from car impacts. You can remove the rails after use or store them with the rails connected for faster set up time. Track comes with two racing surfaces, smooth for loose racing or textured for high level grip when using soft rubber tire compounds. The attached picture above shows a typical RCP Track layout utilizing the expansion kit. You can install the blank tiles at the corners for added space to make the turns or add them to the straights to make more room for passing.
Features: ~ 20” X 20” tile size. ~ US patented design ~ Custom interlocking tiles for quick set up, tear down and storage. ~ Modular design that allows you to combine tracks and create many different layouts. NOTE: This track can only be combined with other 20” size RCP track tile kits or accessories. ~ Soft side rails that help protect the fragile plastic RC car bodies. ~ Quick set up with no tools or glue. ~ RCP Tracks are used by some of the top RC manufacturers exclusively for micro pro racing events around the world. ~ Flexible racing surface allows for the creation of bank turns, just like pro stock car tracks.
RCP Tracks Large Radius Inside Turn Kit Part # 50004
RCP Tracks Large radius turn kit is a great addition to layouts using multiple Wide L or Wide Oval combinations. The kit includes all the pieces needed to replace the RCP short inside radius turns with large sweeping radius turns. A total of (4) complete layouts shown in attached picture are included in each RCP 50004 kit. Kit includes 1 1/8” tall soft side rails and strong threaded attachment pins that secure the rails to the track. No need to worry about the rails coming off from car impacts. You can remove the rails after use or store them with the rails connected for faster set up time.Track comes with two racing surfaces, smooth for loose racing or textured for high level grip when using soft rubber tire compounds.
Features:
~20” X 20” tile size.
~US patented design
~Custom interlocking tiles for quick set up, tear down and storage.
~Modular design that allows you to combine tracks and create many differentlayouts. NOTE: This track can only be combined with other 20” size RCP track tile kits or accessories.
~Soft side rails that help protect the fragile plastic RC car bodies.
~Quick set up with no tools or glue.
~RCP Tracks are used by some of the top RC manufacturers exclusively for micro pro racing events around the world.
~Flexible racing surface allows for the creation of bank turns, just like pro stock car tracks.
~Large radius inside curves for smoother entry into the turns.
RCP Tracks 45 Degree Kit Part # 50045 RCP Tracks 45 degree kit is a great addition to layouts using multiple Wide L or Wide Oval combinations. The kit includes all the pieces needed to make either of the two layouts shown, TWICE. That means you can make two long 45’s or two short 45’s. If you prefer, you can make one of each.Kit includes 1 1/8” tall soft side rails and strong threaded attachment pins that secure the rails to the track. No need to worry about the rails coming off from car impacts. You can remove the rails after use or store them with the rails connected for faster set up time.Track comes with two racing surfaces, smooth for loose racing or textured for high level grip when using soft rubber tire compounds. Features: ~20” X 20” tile size. ~US patented design ~Custom interlocking tiles for quick set up, tear down and storage. ~Modular design that allows you to combine tracks and create many differentlayouts. NOTE: This track can only be combined with other 20” size RCP track tile kits or accessories. ~Soft side rails that help protect the fragile plastic RC car bodies. ~Quick set up with no tools or glue. ~RCP Tracks are used by some of the top RC manufacturers exclusively for micro pro racing events around the world. ~Flexible racing surface allows for the creation of bank turns, just like pro stock car tracks.
RCP TracksLarge Radius Oval Part # 15052
If this is your first track or adding to an existing track, the Super Oval kit by RCP Tracks is a great choice. This huge track measures over 18ft long and 10ft wide. It can be used by itself or combined with other tracks to create larger and more challenging road courses. Split the oval up and create a large sweeping chicane, as shown below. Everything is included in the Super Oval kit to create the layouts shown below. No additional pieces are needed. Kit includes 1 1/8” tall soft side rails and strong threaded attachment pins that secure the rails to the track. No need to worry about the rails coming off from car impacts. You can remove the rails after use or store them with the rails connected for faster set up time.Track comes with two racing surfaces, smooth for loose racing or textured for high level grip when using soft rubber tire compounds.
Features:
~20” X 20” tile size.
~US patented design
~Custom interlocking tiles for quick set up, tear down and storage.
~Modular design that allows you to combine tracks and create many differentlayouts. NOTE: This track can only be combined with other 20” size RCP track tile kits or accessories.
~Soft side rails that help protect the fragile plastic RC car bodies.
~Quick set up with no tools or glue.
~RCP Tracks are used by some of the top RC manufacturers exclusively for micro pro racing events around the world.
~Flexible racing surface allows for the creation of bank turns, just like pro stock car tracks.
~Large radius inside and outside turns for smoother entry into the turns.
RCP Tracks Oval 45 Part # 85044
If this is your first track or adding to an existing track, the Oval 45 kit by RCP Tracks is a great best choice. This huge track measures over 13ft long and 10ft wide and can be used by itself or combined with other tracks to create larger and more challenging road courses. Everything is included in the Wide L kit to create either one of the layouts shown in adjacent pictures. No additional pieces are needed. Kit includes 1 1/8” tall soft side rails and strong threaded attachment pins that secure the rails to the track. No need to worry about the rails coming off from car impacts. You can remove the rails after use or store them with the rails connected for faster set up time.Track comes with two racing surfaces, smooth for loose racing or textured for high level grip when using soft rubber tire compounds. Features: ~20” X 20” tile size. ~ US patented design ~Custom interlocking tiles for quick set up, tear down and storage. ~Modular design that allows you to combine tracks and create many differentlayouts. NOTE: This track can only be combined with other 20” size RCP track tile kits or accessories. ~Soft side rails that help protect the fragile plastic RC car bodies. ~Quick set up with no tools or glue. ~RCP Tracks are used by some of the top RC manufacturers exclusively for micro pro racing events around the world. ~Flexible racing surface allows for the creation of bank turns, just like pro stock car tracks.
RCP Tracks Blank Tiles Part # 50050/50025 RCP blank tiles are a great addition to your current track if you are looking to increase the lane width. Each tile measures 20” X 20” and comes with interlocking links on all four sides. Install them at the curves to allow more room in the turns or widen a large straight section to allow more room to pass. Tiles come with two racing surfaces, smooth for loose racing or textured for high level grip when using soft rubber tire compounds. Each 50020 kit comes with a quantity of 50 blank RCP tiles. Each 50025 kit comes with quantity 25 blank RCP tiles Features: ~20” X 20” tile size. ~US patented design ~Custom interlocking tiles for quick set up, tear down and storage. ~Modular design that allows you to combine tracks and create many differentlayouts. NOTE: This track can only be combined with other 20” size RCP track tile kits or accessories. ~Soft side rails that help protect the fragile plastic RC car bodies. ~Quick set up with no tools or glue. ~RCP Tracks are used by some of the top RC manufacturers exclusively for micro pro racing events around the world. ~Flexible racing surface allows for the creation of bank turns, just like pro stock car tracks.
RCP Tracks 3 Piece Finish Line Part # C350XF
RCP 3 piece finish line tiles are a great addition to your Wide L and Wide oval kits when combining them with the 52436 expansion kit. This 3 piece tile kit comes with all the pieces needed to extend the finish line print across all three tiles. The finish line is printed across all three tiles. Kit includes two side straight tiles and one blank tile with a finish line print on both sides.
Features:
~20” X 20” tile size.
~US patented design
~Custom interlocking tiles for quick set up, tear down and storage.
~Modular design that allows you to combine tracks and create many differentlayouts. NOTE: This track can only be combined with other 20” size RCP track tile kits or accessories.
~Soft side rails that help protect the fragile plastic RC car bodies.
~Quick set up with no tools or glue.
~RCP Tracks are used by some of the top RC manufacturers exclusively for micro pro racing events around the world.
~Flexible racing surface allows for the creation of bank turns, just like pro stock car tracks.
RCP Rail Liners Part #C-1000
RCP rail liners are a great addition to your current track. Not only do they help protect the surface of the inside rails, they also help your car slide off the barrier in competition environments. You can install them on turns or add them to straight rails that receive most of the impacts. There are 5 liners per kit. Each liner measures 40" long and 1 1/8" tall. They come perforated in two spots that allow you to bend up the liners at the front and back of the rail with ease. The liners were designed with two perforations per liner to help lock in the rail and prevent them from coming off. NOTE: You will need to cut the liners at various locations to allow space for the rail pins. Also, some material needs to be cut away at the turns to allow for a smoother bend around the track rails.
Features:
~ Manufactured in plastic to allow flexibility around turns and corner rails.
~ Plastic construction that helps cars bank and slide off rails when impacted ~ Rear vertical support to hold the liner tight to the RCP foam rails.
